An Automatic dubble head shrink sleeve applicator by Aarvi Engineering. A packing device called an automatic double-head shrink sleeve applicator is made to automatically and efficiently apply shrink sleeves to goods. Since this kind of machine usually has two heads, it can wrap multiple products at once or apply two shrink sleeves simultaneously. Key Features: >>Dual Head System: Two separate heads on the applicator apply shrink sleeves to products at the same time. By enabling the simultaneous wrapping of two products or the simultaneous application of many sleeves to a single product, this boosts efficiency. >>Automatic Operation: The system runs on its own with little assistance from the user. When products are fed into the machine, the shrink sleeve is automatically applied and positioned by the applicator. >>Shrink Sleeve Application: The shrink sleeve is a plastic film that is applied over the product; it is typically made of PVC, PET, or OPS. Making sure the sleeve is properly positioned and covers the desired area of the product, the machine places it on the product precisely. >>Heat Shrinking: Following the application of the sleeves, the items pass through heat tunnel. The shrink sleeve conforms to the contour of the goods by contracting firmly around it due to the heat. The resulting tight-fitting, tamper-evident packaging improves and safeguards the product's appearance. >>Speed and Efficiency: These devices can be utilized in the food, beverage, pharmaceutical, and consumer products industries and are made for high-speed operations. When compared to single-head machines, the dual-head system enables a higher throughput. >>Control Systems: PLCs (Programmable Logic Controllers) and touch-screen interfaces are features of modern systems that make monitoring and operation simple. Operators may monitor machine performance, control and modify settings, and resolve any problems with these systems.